Product Introduction

The CAM-Y series scattering and shaping machine is equipped with a crushing and shaping chamber at the lower part, and a classifier is installed at the upper part. It is connected through a flange plate. Under the attraction of the induced draft fan at the rear of the system, the material is sucked into the scattering and shaping machine under negative pressure. Driven by the high-speed rotating crushing plate, the material is quickly thrown onto the serrated lining plate around the crushing plate. After repeatedly impacting and shaping the material, it enters the upper classification area. The classification wheel is operated at high speed for separation, and the ultra-fine powder passes through the classification impeller and enters the cyclone collector and bag dust collector for collection. The coarse material returns to the scattering and shaping area under centrifugal force to continue crushing and shaping. This process can be used in series with a secondary airflow classifier.

Product features

1. The structure is simple and durable, easy to clean and maintain, and the equipment has a long service life;

2. Negative pressure system design ensures long-distance transportation;

3. The entire system is sealed and crushed, with less dust and low noise, and the production process is clean and environmentally friendly;

4. Low failure rate, stable operation, suitable for continuous operation, with an annual operating time of over 8000 hours;

5. The high air volume design solves the problem of high temperature during the operation of other ordinary grinding machines.

technical parameter