Product Introduction

The CBM-F series hammer type crushing and pelletizing equipment adopts a high-speed rotor, combined with a sieve, to achieve better material processing effect. The cantilever shaft adopts an air sealed structure to effectively protect the bearings; According to the different properties of the materials, woven screens or orifice plates can be selected.

Product features

Flexible modular design;

High speed, high efficiency, and high output;

The material will not adhere to the outer shell, making it easy to clean;

Low noise, meeting environmental requirements;

Applied to fine crushing of hard blocks, crystals, or fibrous materials;

The rotor has two working modes to choose from: dao surface and hammer surface;

Thermal protection measures and high operational safety.       

Hard, crystalline, and fibrous materials can be crushed to 30% μ M.

Suitable for laboratory or small batch materials. The compact and modular design allows it to be integrated into any process. Complies with GMP standards and can be used for sterile production.

Product parameters

Crushing fineness: 1 cm -30 μ M

Production: up to 700 kg/h

Product density: 2 kg/dm3

Product temperature: from -20 ° C to+60 ° C

application

Widely applicable, suitable for various dry, wet, and heat sensitive materials

Exquisite modular design allows for standalone use or integration into various production lines

Material smoothness that meets GMP standards, easy to disassemble and clean

ATEX explosion-proof certification in the 0/20 area ensures production safety

Sterility level can reach OEB-5

Can achieve CIP/SIP (online cleaning/online sterilization) function